Genuine zippo flints, suitbable for all zippo lights, including slim and Blu gas lighters. Can also be used in many other lighters, so long as they take a regular sized flint

How to Replace the Flint

Tools you will need - Flat head screw driver

1. Remove the insert from the lighter
2. Using the screw driver, gently unscrew the brass screw. Be careful as this holds the spring compressed and can shoot out if undue care is taken.
3. Tap the lighter down to remove any of the old flint, if nothing comes out roll the wheel backwards and try again. Any small slithers of flint can sometimes jam in the wheel if not removed.
4. Insert new flint to the chamber
5. Tighten the screw, but do not over tighten.
6. Re insert inner to case and you should be ready to rock.

Two useful tips, the small hole in the base of the insert is to hold a spare flint. You can also use the side of the case to open the screw. This should only be done in an emergency as I can scratch and chip the zippo.